Remote Configuration

V Open StampPlot

V Open the Configuration Window.

V On the Port Tab, select TCP.

V Enter the IP address from above.

V Click the Connect and Plot buttons.

V Watch it plot and say wowwwwwwwww.

Interactive control works also!

If you have problems connecting, check with your network administrator, there may be a firewall. StampPlot TCP gateway does not support proxy-servers currently.

One hint is if you are trying to perform interactive control by sending data back to the BASIC Stamp module is to increase the timeout values of serin since the connection will not be as fast as straight serial. A good value is 500 to 1000 for timeout.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment