Qo

spherical spacers. As is depicted more clearly in FIGS. 3, 4 the stationary pole pieces 23 was adjusted to a light-rub and 5, the structural connection unit ultimately utilized relationship when the vhed was slowly rotated: as such consisted of a hardened 60* steel cone mounted within a this separation was calculated to be 0.<K)l ccntimeicr for setscrew and bearing against a hardened steel platen. The a wheel spin rate cf 28.COO revolutions Dcr minute due to contact diameter of the cone against the platen measured the resulting hoop tension. In the drawing of FIG. 3 the approximately 0.007 inch and was loaded within clastic 75 spacing between the pole pieces 23 2nd the generator

Saving Power, Saving The World

Saving Power, Saving The World

Get All The Support And Guidance You Need To Be A Success At Helping Save Power. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Use Renewable Energy As Your Alternative Power Suppliers.

Get My Free Ebook


Post a comment