DIY 3D Solar Panels

[1] N. Bianchi and S. Bolognani, Innovative Design and Optimisation of Electrical Machines, Post-Graduate seminar lecture notes, vol. 7, Helsinki University of Technology, 26/2-3/3, 2001.

[2] I. Boldea and S. A. Nasar, Electric Drives, CRC Press, Boca Raton, 1999.

[3] P. L. Chapman, S. D. Sudhoff and C. A. Whitcomb, "Multiple reference frame analysis of non-sinusoidal brushless DC drives," IEEE Transactions on Energy Conversion, vol. 14, no. 3, pp. 440-446, Sept. 1999.

[4] F. Colamartino, C. Marchand and A. Razek, "Torque ripple minimization in permanent magnet synchronous servodrive," IEEE Transactions on Energy Conversion, vol. 14, no. 3, pp. 616-621, Sept. 1999.

[5] M. J. Corley and R. D. Lorenz, "Rotor position and velocity estimation for a salient-pole permanent magnet synchronous machine at standstill and high speed," IEEE Transactions on Industry Applications, vol. 34, no. 4, pp. 784-789, July/Aug. 1998.

[6] T. Glad and L. Ljung, Reglerteori (in swedish), Studentlitteratur, Lund, 1997.

[7] L. Harnefors and H.-P. Nee, "A general algortim for speed and position estimation of AC motors," IEEE Transactions on Industrial Electronics, vol. 47, no. 1, pp. 77-83, Feb. 2000.

[8] L. Harnefors and H.-P. Nee, Control of Variable-Speed Drives, Royal Institute of Technology, Stockholm, Sweden, 2000.

[9] L. Harnefors and H.-P. Nee, "Model-based current control of AC machines using the internal model control method," IEEE Transactions on Industry Applications, vol. 34, no. 1, pp. 133-141, Jan./Feb. 1998.

[10] L. Harnefors, On Analysis, Control and Estimation of Variable-Speed Drives, Ph. D. thesis, Royal Institute of Technology, Stockholm, Sweden, 1997.

[11] L. Harnefors, K. Pietilainen and L. Gertmar, "Torque maximizing field weakening control: design, analysis and parameter selection," IEEE Transactions on Industrial Electronics, vol. 48, no. 1, pp. 161-168, Feb. 2001.

[12] J. Hellsing, Design and Optimization of a Permanent Magnet Motor for a Hybrid Electric Vehicle, Lic. thesis, Chalmers University of Technology, Gothenburg, Sweden, 1998.

[13] J. Holtz and L. Springob, "Identification and compensation of torque ripple in high-precision permanent magnet motor drives," IEEE Transactions on Industrial Electronics, vol. 43, no. 2, pp. 309-320, April 1996.

[14] A. Jack, B. Mecrow and C. Weiner, "Switched reluctance and permanent magnet motors suitable for vehicle drives - a comparision," Proceedings of the IEE Seminar on Hybrid and Fuel Cell Vehicles, pp. 6/1-6/5, April, 2000.

[15] T. M. Jahns and W. L. Soong, "Pulsating torque minimization techniques for permanent magnet AC motor drives - a review," IEEE Transactions on Industrial Electronics, vol. 43, no. 2, pp. 321-330, Feb. 1996.

[16] C.-I. Kang and I.-J. Ha, "An efficient torque control algorithm for BLDCM with a general shape of back EMF," Proceedings of the 24th annual Power Electronics Specialists Conference (PESC), pp. 451-457, 20-24 June, 1993.

[17] H. Le-Huy, R. Perret and R. Feuillet, "Minimization of torque ripple in brushless DC motor drives," IEEE Transactions on Industrial Applications, vol. IA-22, no. 4, pp. 748-755, July/Aug. 1986.

[18] W. Leonard, Control of Electrical Drives, Springer-Verlag, Berlin, 1996.

[19] T. Li and G. Slemon, "Reduction of cogging torque in permanent magnet motors," IEEE Transactions on Magnetics, vol. 24, no. 6, pp. 2901-2903, Nov. 1988.

[20] J. Lindstrom, Development of an Experimental Permanent-Magnet Motor Drive, Lic. thesis, Chalmers University of Technology, Gothenburg, Sweden, 1999.

[21] A. Madani, J. P. Barbot, F. Colamartino and C. Marchand, "An observer for the estimation of the inductance harmonics in a Permanent-Magnet Synchronous Machine," Proceedings of the IEEE International Conference on Control Applications, pp. 517-521, Oct. 5-7, 1997.

[22] A. Madani, J. P. Barbot, F. Colamartino and C. Marchand, "Reduction of torque pulsations by inductance harmonics identification of a permanent-magnet synchronous machine," Proceedings of the 4th IEEE Conference on Control Applications, pp. 787792, 28-29 Sept. 1995.

[23] C. Mademlis and V. G. Agelidis, "On considering magnetic saturation with maximum torque to current control in interior permanent magnet synchronous motor drives," IEEE Transactions on Energy Conversion, vol. 16, no. 3, pp. 246-252, Sept. 2001.

[24] J. Malan and M. J. Kamper, "Performance of a hybrid electric vehicle using reluctance synchronous machine technology," IEEE Transactions on Industry Applications, vol. 37, no. 5, pp. 1319-1324, Sept./Oct. 2001.

[25] M. Morari and E. Zafiriou, Robust Process Control, Prentice-Hall, New Jersey, 1989.

[26] D. W. Novotny and T. A. Lipo, Vector Control and Dynamics of AC Drives, Clarendon Press, Oxford, 1996.

[27] V. Petrovic, R. Ortega, A. M. Stankovic and G. Tadmor, "Design and implementation of an adaptive controller for torque ripple minimization in PM synchronous motors," IEEE Transactions on Power Electronics, vol. 15, no. 5, pp. 871-880, Sept. 2000.

[28] K. M. Rahman, B. Fahimi, G. Suresh, A. V. Rajarathnam and M. Ehsani, "Advantages of switched reluctance motor applications to EV and HEV: design and control issues," IEEE Transactions on Industry Applications, vol. 36, no. 1, pp. 111-121, Jan./Feb. 2000.

[29] M. S. Sarma, Electric Machines, PWS Publishing Company, Boston, 1996.

[30] L. Springob and J. Holtz, "High-bandwidth current control for torque-ripple compensation in PM synchronous machines," IEEE Transactions on Industrial Electronics, vol. 45, no. 5, pp. 713-721, Oct. 1998.

[31] P. Vas, Vector Control of AC Machines, Clarendon Press, Oxford, 1990.

[32] V. Wouk, "Hybrid electric vehicles," Scientific American, no. 10, Oct. 1997.

[33] F. A. Wyczalek, "Hybrid electric vehicles year 2000," Proceedings of the Energy Conversion Engineering Conference and Exhibit (IECEC) 35th Intersociety, vol. 1, pp. 349-355, July 24-28, 2000.

[34] E. Yamada and Z. Zhao, "Applications of electrical machine for vehicle driving system," Proceedings of the Power Electronics and Motion Control Conference (PIEMC), vol 3., pp. 1359-1364, Aug. 15-18, 2000.

[35] K. J. Astrom and B. Wittenmark, Adaptive Control, Addison Wesley , Massachusetts, 1995.

Was this article helpful?

Do we really want the one thing that gives us its resources unconditionally to suffer even more than it is suffering now? Nature, is a part of our being from the earliest human days. We respect Nature and it gives us its bounty, but in the recent past greedy money hungry corporations have made us all so destructive, so wasteful.

## Post a comment