Wilson R.e. Lissaman P.b.s. And Walker S.n. 1976 Aerodynamic Performance Of Wind Turbines. Energy Research And Development Administration Erda Nsf 04014-76 1.

Energy2green Wind And Solar Power System

Wind Energy DIY Guide

Get Instant Access

1. I. A. Abbott and A. E. Von Dolnhoff. 1959. Theory of wing sections, including a summary of airfoil data. Dover.

2. S. J. Miley. 1982. A catalog of low Reynolds number airfoil data for wind turbine applications. RFP-3387, Department of Aerospace Engineering, Texas A&M University.

3. R. E. Wilson, P. B. S. Lissaman, and S. N. Walker. 1976. Aerodynamic performance of wind turbines. ERDA/NSF/04014-76-1, UC-60. Available from NTIS.

4. D. M. Eggleston and F. S. Stoddard. 1987. Wind turbine engineering design. New York: Van Nostrand Reinhold.

5. D. Le Gourieres. 1982. Wind power plants, theory and design. Oxford, UK: Pergamon Press.

6. L. L. Freris, ed. 1990. Wind energy conversion systems. Englewood Cliffs, NJ: Prentice Hall.

7. D. A. Spera, ed. 1994. Wind turbine technology. New York: ASME Press.

8. Wind energy conversion. C00-4131-Ti. Available from NTIS. Nine separate reports: "Methods for Design Analysis of Horizontal Axis Wind Turbines" "Aerodynamics of Horizontal Axis Wind Turbines"

"Dynamics of Horizontal Axis Wind Turbines" "Drive System Dynamics"

"Experimental Investigation of a Horizontal Axis Wind Turbine" "Nonlinear Response of Wind Turbine Rotor"

"Effects of Tower Motion of the Dynamic Response of Windmill Rotor" "Free Wake Analysis of Wind Turbine Aerodynamics" "Aerodynamics of Wind Turbine with Tower Disturbances"

9. E. H. Lysen. 1983. Introduction to wind energy. The Netherlands: Consultancy Services Wind Energy Developing Countries. Amersfoort, Holland.

10. T. Burton, D. Sharpe, N. Jenkins, and E. Bossanyi. 2001. Wind energy handbook. New York: John Wiley & Sons.

11. J. F. Manwell, J. G. McGowan, and A. L. Rodgers. 2002. Wind energy explained. New York: Wiley.

12. M. O. L. Hansen. 2008. Aerodynamics of wind turbines. 2nd ed. London: Earthscan Publications.

13. E. A. Avollone, T. Baumeister III, and A. Sadegh, eds. 2002. Marks' standard handbook for mechanical engineers. 11th ed. New York: McGraw Hill.

14. J. S. Rohatgi and V. Nelson. 1994. Wind characteristics, an analysis for the generation of wind power. Alternative Energy Institute, West Texas A&M University.

15. J. L. Tangler. 1983. Horizontal-axis wind system rotor performance model comparison, a compendium. RFP-3508, UC-60, Rockwell Int., Wind Energy Research Center (now National Wind Technology Center).

16. R. J. Templin. 1974. Aerodynamic performance theory for the NTC vertical-axis wind turbine. LTR-LA-160, National Research Council of Canada.

17. R. J. Maraca et al. 1975. Theoretical performance of vertical axis windmills. NASA TM TMS-72662, NASA-Langley Research Center.

18. J. H. Strickland. 1975. The Darrieus turbine: A performance prediction model using multiple stream-tubes. SAND 75-0431, Advance Energy Projects Department, Sandia Laboratories.

19. R. E. Akins, D. E. Berg, and W. T. Cyrus. 1987. Measurements and calculations of aerodynamic torques for a vertical-axis wind turbine. SAND 86-2164, UC-60.

20. S. Schreck and M. Robinson. 2007. Wind turbine blade flow fields and prospects for active aerodynamic control. NREL/CP-500-41606. www.nrel.gov/wind/pdfs/41606.pdf.

21. D. Simms et al. 2001. NREL Unsteady Aerodynamics Experiment in the NASA-Ames wind tunnel: A comparison of predictions to measurements. NREL/TP-500-29494.

22. J. McCarty. 1993. PROP93: Interactive editor and graphical display. In Proceedings, Windpower '93, p. 495.

23. J. Tangler and J. D. Kocurek. 2005. Wind turbine post-stall airfoil performance characteristics guidelines for blade-element momentum methods. NREL/CP-500-36900. Presented at 43rd AIAA Aerospace Sciences Meeting. www.nrel.gov/docs/fy05osti/36900.pdf.

24. M. S. Selig and J. L. Tangler. 1994. A multipoint inverse design method for horizontal axis wind turbines. In Proceedings, Windpower '94, p. 605.

25. M. S. Selig. PROPID, programs and user's manual. www.ae.uiuc.edu/m-selig/propid.

26. J. L. Tangler and D. M. Sommers. 1993. NREL airfoils families for HAWTS. In Proceedings, Windpower '93, p. 117.

27. B. C. Andrews. 1993. Optimal design of complex wind turbine blades. Master's thesis, West Texas A&M University. Includes user's manual.

28. B. Andrews and K. VanDoren. 1988. A method for geometric modeling of wind turbine blades. In Seventh ASME Wind Energy Symposium, p. 115.

29. K. L. Starcher. 1995. Atmospheric test of special purpose thin airfoil family. Master's thesis, West Texas A&M University.

30. K. L. Starcher, V. C. Nelson, and J. Wei. 1996. Test results of NREL 10m, special-purpose family of thin airfoils. In Proceedings, Windpower 1996, p. 261.

31. J. van Meel and P. Smulders. 1989. Windpumping, a handbook. World Bank Technical Paper 101, p. 30.

32. M. H. Khan. 1978. Model and prototype performance characteristics of a Savonius rotor windmill. Wind Engineering 2:75.

33. T. D. Ashwill. 1992. Measured data for the Sandia 34-meter vertical axis wind turbine. SAND 91-2228.

34. D. R. Miller and P. J. Sirocky. 1985. Summary of NASA/DOE Aileron-Control Development Program for Wind Turbines. In Proceedings, Windpower '85, p. 537.

35. DOE-EPRI Wind Turbine Verification Program. www.p2pays.org/ref/11/10097.pdf.

36. P. Veers, G. Bir, and D. Lobitz. 1998. Aeroelastic tailoring in wind-turbine blade applications. In Proceedings, Windpower '98, p. 191. www.sandia.gov/wind/other/AWEA4-98.pdf.

37. Proven, blade design. www.provenenergy.co.uk/pdf/FactSheet_Blade_Design.pdf.

38. LM Glasfiber, technology. www.lmglasfiber.com/Technology.aspx.

39. Wind turbine blade, Sandia Laboratories. www.sandia.gov/wind/Blades.htm.

40. Danish Wind Industry Association, blade testing. www.windpower.org/en/tour/manu/bladtest.htm.

41. J. Wei and J. McCarty. 1993. Acoustic emission evaluation of composite wind turbine blades during fatigue testing. Wind Engineering, No. 6, p. 266.

42. J. Cotrell, W. Musial, and S. Hughes. 2006. Necessity and requirements of a collaborative effort to develop a large wind turbine blade test facility in North America. Technical Report NREL-TP-500-38044. www.nrel.gov/wind/pdfs/38044.pdf.

43. J. Paquette, J. van Dam, and S. Hughes. 2007. Structural testing of 9 m carbon fiber wind turbine research blades. Paper presented at Wind Energy Symposium. www.nrel.gov/wind/pdfs/40985.pdf.

44. D. J. Malcolm and A. C. Hansen. 2006. WindPACT turbine rotor design study June 2000-June 2002. Subcontract Report NREL/SR-500-32495. www.nrel.gov/wind/pdfs/32495.pdf.

45. J. Jonkman. FAST, an aeroelastic design code for horizontal axis wind turbines. http://wind.nrel.gov/ designcodes/simulators/fast.

46. J. Schmid and W. Palz. 1986. European wind energy technology, state of the art of wind energy converters in the European community. Solar Energy R&D in the European Community, Series G Wind Energy, Vol. 3. Dordrecht Boston: D. Reidel Publishing.

47. National Wind Technology Center, NREL. Lancaster Tokyo: Furling Workshop presentations. http:// wind.nrel.gov/furling/presentations.html.

48. J. M. Jonkman and A. C. Hansen. 2004. Development and validation of an aeroelastic model of a small furling wind turbine. NREL/CP-500-30589. www.nrel.gov/docs/fy05osti/39589.pdf.

49. M. Bikdash. 2000. Modeling and control of a Bergey-type furling wind turbine. NREL and Sandia Labs. http://wind.nrel.gov/furling/bikdash.pdf.

50. B. Vick et al. 2000. Development and testing of a 2-kilowatt wind turbine for water pumping. AIAA-2000-0071. In 19th ASME Wind Energy Symposium, p. 328.

51. B. Vick and R. N. Clark. 2000. Testing of a 2-kilowatt wind-electric system for water pumping. In Proceedings, Windpower 2000. CD.

Was this article helpful?

0 0
Renewable Energy 101

Renewable Energy 101

Renewable energy is energy that is generated from sunlight, rain, tides, geothermal heat and wind. These sources are naturally and constantly replenished, which is why they are deemed as renewable. The usage of renewable energy sources is very important when considering the sustainability of the existing energy usage of the world. While there is currently an abundance of non-renewable energy sources, such as nuclear fuels, these energy sources are depleting. In addition to being a non-renewable supply, the non-renewable energy sources release emissions into the air, which has an adverse effect on the environment.

Get My Free Ebook


Post a comment